Before getting started, make sure your shower is setup to accommodate Sprig, and shop compatible showerheads and shower arms below if you need to update your space.
HOW TO INSTALL SPRIG
Take a couple of minutes and get familiar with the installation process for the Sprig Starter Kit. Follow these simple steps to make the process a breeze.Watch Video
REMOVE YOUR SHOWERHEAD
Using an adjustable wrench and a towel, turn showerhead counterclockwise to remove, using the towel to protect from scuffing. Wipe the shower arm clean and dry before moving onto the next step.
ADD TAPE + ADAPTER PIECE
Wrap plumber’s tape around the shower arm threads 3-5 times. Verify adapter piece orientation and screw on, using provided wrench to tighten.
INSTALL THE DEVICE
Push the infusion device firmly onto the adapter. When installed properly, you will no longer see the adapter. Tighten the setscrews using the provided hex wrench.
REATTACH YOUR SHOWERHEAD
Wrap the plumber’s tape around threads three to five times and then reinstall your showerhead by rotating clockwise to tighten.
TEST FOR LEAKS
Turn on your shower and check for leaks at connection points. In the back of the device, there is a weep hole that is designed to release water when the experience is engaged. This is normal and to be expected.
HOW TO USE SPRIG
Once your device is installed, the fun part begins. Pick a pod, do the twist, and step into shower bliss as your space fills with mood-matching aromatherapy and premium self-care ingredients.